Filter
Top Products
3/8 x 3-3/4"~
FIGURE 16
STEP 16:
¯
Refer to cable ILLUSTRATION "A" on page 11 for cable routing while installing lmlleys.
¯ [CABLE MUST BE POSITIONED BETWEEN PULLEYAND LOWER BOLTASSEMBLY ON
LEG PEDESTAL (11) AND FRAME (1)]
Securely assemble the ball end of the LOW CABLE (21) and one 3-1/2" PULLEY (24) to the LEG PEDESTAL (11) using
3/8 X 3-3/4" BOLTS (30), two 3/8" X 1-1/16" FLANGE SPACERS (42), two 3/8" WASHERS (64), and two 3/8" LOCKNUTS (34).
(NOTE: The LEG CABLE (91) should be routed over the retaining bolt as showu in FIGURE 16.)
Securely assemble one 3-1/2" PULLEY (24) to the FRAME (1) using one 3/8 X 3" BOLTS (29), and one 3/8" LOCKNUT
(NOTE: The LEG CABLE (91) should be routed over the retaining bolt as shown in FIGURE 16.)