Filter
Top Products
DO NOT’
OVERII(]:II]~
SECURELY
TIGHTEN
JAM NUT
FIGURE 15
STEP 15
¯
Slip ring of WEIGHT SELECTOR PIN (5 i) down WEIGHT STACK SHAFT (18) and insert pin into one c,f the weights
¯
Screw end of LAT CABLE (20) into top of PLATE SHAFT (18) and securely tighten JAM NUT as shown in FIGURE
¯
Securely tighten 1/2" LOCK NUT (55) on PRIMARY PIVOT of PRESS ARM (9).
IMPORTANT! DO NOT OVERTIGHTEN: PRESS ARM SHOULD ROTATE FREELY.
[ ~/2 [ ~/2 [ ~/2 [ ~/2 [ ~/2 [ :~/2 [
0 1 2 3 4 5 6
.... 17._