Filter
Top Products
3/8 X 2-3/4"
FIGURE 10
STEP 10:
¯
Apply WEIGHT STACK LABELS (61) to WEIGHTS (22) and HEAD PLATE (19) as shown in FIGURE
Begin with number one at the HEAD PLATE (19) with larger numbers in consecutive order towards botlom of weight stack.
Apply four PARAGLIDES (58) to the INSIDE of the tube of FRAME (1) as shown. Apply the remaining
PARAGLIDES (58) to the OUTSIDE and FLUSH TO BOTTOM of tube located on SEAT ADJUSTMENT (10)
¯
Securely assemble one SEAT PAD (13) to the SEAT ADJUSTMENT (10) using two 3/8 X 2-3/4" BOLTS (28) and
3/8" WASHERS (36) as shown.
¯
Securely assemble one SEAT PAD (13) to the FRAME (1) using two 3/8 X 2-3/4" BOLTS (28) and 2,/8 " WASHERS (36)
as shown.
¯
Gently insert SEAT ADJUSTMENT (10) into tube located on FRAME (1)
DO NOT FORCE THE SEATADJUSTMENT IN. THIS MAY CAUSE THE PARAGLIDES TO TEAR.
¯
Securely tighten the SPRING PIN (50) to the FRAME (1) and hand tighten the THREE PRONG KNOB