Filter
Top Products
19
Thank you for purchasing the LifeFitness FIT SERIES MULTI PRESS. If unsure of proper use of equip-
ment, call your local LifeFitness distributor or call the LifeFitness customer service department at
(800) 351-3737.
FIGURE 19
STEP 19:
48
57
56
58
45 3/8 X 25mm BUTTON HEAD
1
• SECURELY assemble the TOWER CAP (56) to the TOWER (1) using two 3/8 X 25mm BUTTON HEAD BOLTS (45) and two 3/8”
BLACK FLAT WASHERS (48) as shown above.
• SECURELY assemble the FRONT SHROUD (57) and the REAR SHROUD (58) to the TOWER (1) using ten 3/8 X 90mm BUTTON HEAD
BOLTS (47), twenty 3/8” BLACK FLAT WASHERS (48) and ten 3/8” ACORN NUTS (59) as shown above.
59
47 3/8 X 90mm BUTTON HEAD
SERIAL # LOCATION