Filter
Top Products
14
STEP 14:
FIGURE 14
• Route the MULTI PRESS CABLE (54) through the vertical bracket on the PRESS FRAME (8) and SECURELY assemble one 4-1/2”
PULLEY (19) to the bracket using four RH CAPS (53), two 3/8 X 43mm BOLTS (36), four 3/8” SAE WASHERS (50), four 3/8” RH
WASHERS (51) and two 3/8” LOW HEIGHT LOCK NUTS (49) as shown in FIGURE 14.
• Route the MULTI PRESS CABLE (54) through the PRESS FRAME (8) and the horizontal bracket on the PRESS FRAME (8) and
SECURELY assemble one 4-1/2” PULLEY (19) to the bracket using one BLACK RH CAP (52), one RH CAP (53), one 3/8 X 43mm BOLT
(36), two 3/8” SAE WASHERS (50), two 3/8” RH WASHERS (51), one 3-1/2 X 1” CABLE CLIP (2) and one 3/8” LOW HEIGHT LOCK
NUT (49) as shown in FIGURE 14.
36 3/8 X 43mm
3/8 X 43mm 36
51
54
52 BLACK
49
2
50
8
19
53
13
• Route the MULTI PRESS CABLE (54) through the vertical bracket on the BASE (13) and SECURELY assemble one 4-1/2” PULLEY
(19) to the bracket using two RH CAPS (53), one 3/8 X 43mm BOLT (36), two 3/8” SAE WASHERS (50), two 3/8” RH WASHERS
(51) and one 3/8” LOW HEIGHT LOCK NUT (49) as shown in FIGURE 14.
3/8 X 43mm 36