Filter
Top Products
4
Important Safety Information
SBD3596 & SBD35108 Snow Blowers 370-347M
12/15/15
Table of Contents
Safety Labels
Your Snow Blower comes equipped with all safety labels in
place. They were designed to help you safely operate your
implement. Read and follow their directions.
1. Keep all safety labels clean and legible.
2. Refer to this section for proper label placement. Replace
all
damaged or missing labels. Order new labels from your
nearest Land Pride dealer. To find your nearest dealer,
visit our dealer locator at www.landpride.com.
3. Some new equipment installed during repair requires
safety la
bels to be affixed to the replaced component as
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request.
4. Refer to this section for proper label placement.
To install new labels:
a. Clean surface area where label is to be placed.
b. Spray soapy water onto the cleaned area.
c. Peel backing from label and press label firmly onto the
surface.
d. Squeeze out air bubbles with edge of a credit card or
wit
h a similar type of straight edge.
35708
35708
35709
818-798C
Warning: Pinch Point Hazard
818-205C
Warning: Moving Parts Hazard
818-522C
Danger: Moving Parts Hazard