Support User Manuals

Invacare RPA600-1E Fitness Equipment User Manual

Open as PDF

of 40

SECTION 2—ASSEMBLY

Electric Portable Patient Lift - RPA600-1E 12 Part No 1078988

Assembling the Electric Actuator to the Boom

NOTE:Forthispr ocedur e,refertoFIGURE 2.2.

1. Removethe shoulderbolt,washerand

nutfromthemountingbracketonthe

boomassembly.

2. Unpackthepinchguardfromthepatient

liftcarton.

NOTE:Thebottomoftheelectricactuator

assemblywi llalr eadybeassembledtothemast

mountingbracket.

3. Cuttheplastic‐wrapthatsecuresthe

boomandmasttogether.

4. Lift‐upon theboomandplaceitonyour

leftshoulde r.

FIGURE 2.2 Assembling the Electric Actuator

to the Boom

5. Lettheactuatorrestonyourright‐sideofyourchestandrotatetheshaftextensionofthe

actuatorassemblyuntilitlines‐upwiththemountingholesintheboomassembly.

6. Placethe pinchguardovertheshaftextensionoftheactuator.

7. Aligntheholesoftheboomassemblymounting bracketwith thoseoftheactuatorand

insertthebolt.Securewithnut.

NOTE:Besur ethattheboltiscompletelythrough theholesoftheboomassemblymountingbracketand

theactuatorassembly. Theboomassemblywillpivoteasilyifthemountinghardwar eisalignedproperly

whentheboomassemblyissecuredtothema st.

CAUTION

DO NOT overtighten the nut and bolt. This damages the mounting bracket.

8. Plugin theelectricalconnectorsfromtheelectricactuatortothebottomofthe battery

assembly.

9. Plugth ependantcontrolintothebottomofthebatteryassembly.

NOTE:Thebottomoftheactuatorassembly willalr eadybeassembledtothemastmountingbr acket.

Pinch Guard

NOTE: Turn 90°

Mounting Bracket

previous next