Filter
Top Products
26 ANT+ Sensors
Your Forerunner is compatible with the
GSC 10 speed and cadence bike sensor.
For a list of third-party ANT+ sensors that
are compatible with the Forerunner, go to
www.garmin.com/intosports.
Before you start training, you must be in
bike sport mode, and you must pair the
GSC 10 with your Forerunner.
Select > >
> bike name >
.
Select in the
eld.
If necessary, select to select the
sensor type.
Cadence data from the GSC 10 is always
recorded. If there is no GSC 10 paired,
GPS data is used to calculate the speed
and distance.
Cadence is your rate of pedaling or
“spinning” measured by the number of
revolutions of the crank arm per minute
(rpm). There are two sensors on the
GSC 10: one for cadence and one for
speed.
For information about cadence alerts, see
page 9.
The non-zero data-averaging setting
is available if you are training with an
optional cadence sensor. The default
setting is to include zero values that occur
when you are not pedaling.
To turn the non-zero averaging on or off,
select > >
> > .
For a list of third-party ANT+ sensors that
are compatible with the Forerunner, go to
www.garmin.com/intosports.
Before you can calibrate your power
meter, it must be properly installed and
actively recording data. You must be in
bike sport mode.