Filter
Top Products
7. Install the console back to the upright assembly.
A. Locate the console back (#4) and twelve screws, 8-32 x .38” (#13).
B. Place the console back (#4) in the correct position on the upright assembly (#3). See
Figure 5.
Cybex 445T Treadmill Owner’s Manual
Figure 5
#4
#13
#3
#13
#4
#13
#3
Setup
and
Assembly
Page 5-6
Figure 6
C. Using a Philips head screwdriver install two screws 8-32 x .38” (#13) to hold the
console back (#4) in place. Do not fully tighten at this time. See Figure 5.
D. Using a Philips head screwdriver secure the console back (#4) to the upright assembly
(#3) using ten screws 8-32 x .38” (#13). Fully tighten the two screws installed in step
7C. See Figure 6.