Filter
Top Products
Updated 23/05/07 RAOM0507 Apollo Bicycle Company Pty. Ltd. ABN: 60 001 914 469
45
Installation and Adjustment – Linear Pull Brakes
1. When assembling linear pull brakes, insert the brake body into the centre
spring hole in the frame mounting boss, and use the link fixing bolt to fasten
the brake body to the frame.
2. Hold the shoe against the rim and swap the position of the 6mm and 3mm
B washer so that A is maintained at 39mm or more. (Refer to the following
diagram for clarification.)
5mm Allen Key
Spring
hole
Stopper
pin
39mm or more
A
Washer
Link
fixing
bolt
3mm washer B 6mm washer B
Washer AWasher BWasher
Shoe Fixing Link
Shoe Fixing Nut
5mm Allen Key
Spring
hole
Stopper
pin
39mm or more
A
Washer
Link
fixing
bolt