A SERVICE OF

logo

Open as PDF
next previous
TROUBLESHOOTING
5-12
3
Move the black lever with the blue
sticker up to the right. Remove any
misfed paper from the area
between the plate and the brush
rollers.
4
Check the area around the Stapler for misfed staples.
5
When you determine that there is a staple misfeed, turn off the machine
power before attempting to clear the misfeed.
6
Remove the staple cartridge and
inspect the area for misfed staples.
7
Replace the staple cartridge and turn on the machine power.
Note: When you clear a staple misfeed, stapling is disabled for the remainder
of the print job.
8
Push the Finisher unit back into the Finisher housing.