A SERVICE OF

logo

TROUBLESHOOTING
5-8
Clearing Misfeeds from Area D
Follow these steps to clear a paper misfeed from Area D.
1
Open the External Tray, and open
the Left Cover.
Note: When the optional Finisher is installed, you must separate the Finisher
from the printer. To perform this task, open the Finisher door, and pull
the square locking bar out and up. Move the Finisher away from the
printer.
2
Remove any misfed paper from the area inside of the Left Cover.
3
Close the Left Cover and the External Tray.
4
Check the paper exit that leads to the Standard Output Tray (Output Tray 1)
for misfed paper.
Note: When necessary, reinstall the Finisher when you have removed all
the misfed paper and closed the Left Cover and External Tray.