3-11
Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
OL-16000-07
Chapter 3 Monitoring and Backing Up the BTS
Exporting Provisioned Data
–
Non-Native = Y/N
To generate the following reports, use
report dn-summary:
• All DNs in NDC and EC
• Thousands group in NDC and EC
• Operating company number (OCN)
• Switch Common Language Location Identifier (CLLI) code
• OCN + CLLI code—entries must match LERG data
Creating Reports for Nonrural Primary and Intermediate Carriers
NRUF reporting for nonrural primary and intermediate carriers:
• Occurs at a thousands-block level (NPA-NXX-X)
• Applies only to NANP
The report returns the following based on the DN2SUBSCRIBER table’s STATUS token:
Table 3-5 NRUF Report Data for Nonrural Carriers
Data Groups Matching Data from the DN2SUBSCRIBER Table
Assigned DNs
• Individual DNs:
ndc=<npa>; ec=<nxx>; DN=[0-9][0-9][0-9]; (status=assigned)
AND ADMIN-DN=N
ndc=<npa>; ec=<nxx>; DN=[0-9][0-9][0-9]; (status=ported-out)
AND ADMIN-DN=N
• DID DNs:
ndc=<npa>; ec=<nxx>; DN=xxxx; (status=assigned) AND
ADMIN-DN=N; X 10000
ndc=<npa>; ec=<nxx>; DN=xxxx; (status=ported-out) AND
ADMIN-DN=N; X 10000
ndc=<npa>; ec=<nxx>; DN=[0-9]xxx; (status=assigned) AND
ADMIN-DN=N; X 1000
ndc=<npa>; ec=<nxx>; DN=[0-9]xxx; (status=ported-out) AND
ADMIN-DN=N; X 1000
ndc=<npa>; ec=<nxx>; DN=[0-9][0-9]xx; (status=assigned) AND
ADMIN-DN=N; X 100
ndc=<npa>; ec=<nxx>; DN=[0-9][0-9]xx; (status=ported-out)
AND ADMIN-DN=N; X 100
ndc=<npa>; ec=<nxx>; DN=[0-9][0-9][0-9]x; (status=assigned)
AND ADMIN-DN=N; X 10
ndc=<npa>; ec=<nxx>; DN=[0-9][0-9][0-9]x;
(status=ported-out) AND ADMIN-DN=N; X 10
• PORTED-OUT DNs
Intermediate Telephone
Directory Numbers
0
Reserved DNs 0
