Filter
Top Products
Invasive Pressure
Propaq Encore Reference Guide 55 Welch Allyn
ZERO REJECTED (or REJECT). Unable to establish a zero reference value. The message
remains until the
CANCEL button is pressed.
CANCELED. This message appears if
CANCEL is pressed while the channel is zeroing.
These equipment messages can appear in an equipment alert window.
TRANSDUCER NOT DETECTED. The transducer connection is broken.
TRANSDUCER SHORT CIRCUIT. This message appears when the Propaq Encore
senses a short in the transducer. The transducer should be replaced.
INCOMPATIBLE TRANSDUCER. Check the compatible transducers listed in the Welch
Allyn Products and Accessories booklet to ensure you are using a compatible transducer.