Filter
Top Products
Learning the Propaq Encore
Welch Allyn 38 Propaq Encore Reference Guide
NIBP
For noninvasive pressure measurements, keep the Propaq Encore in manual NIBP operating
mode and take pressure measurements by pressing the
START button. You can also press the
NIBP Menu's
TURBOCUF button to consecutively take pressure measurements for five minutes.
Printer Message
Simulated data can be printed on the Propaq Encore Printer. All printouts include the
message “SIMULATED DATA” every four inches to prevent simulated data from being
mistaken for actual patient data.
What You Cannot Do With In-Service Mode
•You cannot use in-service mode to calibrate the monitor.
•You cannot set the Propaq Encore to take automatic noninvasive pressure measurements
(except Turbocuf) while using in-service mode.
•You cannot use Defib Sync or Real-time ECG output while using in-service mode.
•You cannot activate in-service mode if you have been monitoring a patient.