Filter
Top Products
GB
OWNER’S MANUAL
•
T60
13
position. Turn off the power switch and unplug the
power cord from the wall and the treadmill. Take hold
of the rear end of the running base and lift up until the
running base is locked in place. NOTE! The gas spring is
designed to make lifting the running base easier. Always
remember to ensure that the running base is locked
in the storage position. When in storage position, the
treadmill will automatically rest on the transportation
wheels. Push the equipment on the transportation
wheels. To release the folding lock, press the left gas
spring lightly with your foot on the sticker indicating
the folding mechanism and pull the running base down.
Lower the treadmill carefully onto the floor.
NOTE! Transport the treadmill with extreme caution
over uneven surfaces, for example over a step. The
treadmill should never be transported upstairs using
the wheels over the steps, instead it must be carried.
We recommend that you use a protective base when
transporting the equipment. The running belt needs to
be realigned and centered after moving.
To prevent malfunctioning of the treadmill, store it in a
dry place with as little temperature variation as possible,
protected against dust. Always unplug the treadmill
from the electrical outlet when not in use.
TECHNICAL DATA
Length ....................................................202 cm / 79“
(storage position ................................... 115 cm / 45”)
Height ....................................................138 cm / 54”
(storage position ................................... 175 cm / 69”)
Width ......................................................94 cm / 37”
Weight ..............................................105 kg / 231 lbs
Running surface ......................................54 x 138 cm
Speed ..........................0,5-18,0 km/h / 0,3-11,2 mph
Elevation range ................................................0-10 %
Motor ..............................................................2,5 HP
T60 treadmill meets the requirements of the EU’s EMC
Directives on electromagnetic compatibility (89/336/
EEC) and electrical equipment designed for use within
certain voltage limits (73/23/EEC). This product
therefore carries the CE label. T60 treadmill meets EN
precision and safety standards (Class HA, EN-957, parts
1 and 6).
Due to our continuous policy of product development,
Tunturi reserves the right to change specifications
without notice.
CAUTION! The instructions must be followed carefully
in the assembly, use and maintenance of your
equipment. The warranty does not cover damage due to
negligence of the assembly, adjustment and maintenance
instructions described herein. Changes or modifications
not expressly approved by Tunturi Oy Ltd will void the
user’s authority to operate the equipment!
We wish you many enjoyable trainings with your
new Tunturi training partner!
T60_manual_uusi versio_j.indd 13T60_manual_uusi versio_j.indd 13 25.10.2006 13:33:5625.10.2006 13:33:56