Filter
Top Products
8
OW NER 'S MAN UAL
The device is easy to move by pushing along on the
integrated transport wheels. Tilt the device from
the front and push along the floor on the wheels at
the front support. We recommend that you use a
protective base when transporting the equipment.
To prevent the equipment malfunctioning, store in
a dry place with as little temperature variation as
possible and protected from dust.
MAINTENANCE
The equipment requires very little maintenance.
Check, however, from time-to-time that all screws
and nuts are tight.
• After exercising, clean the equipment with a soft,
absorbent cloth. Do not use solvents.
• Never remove the equipment’s protective casing.
MALFUNCTIONS
NOTE! Despite continuous quality control, defects
and malfunctions caused by individual components
may occur in the equipment. In most cases it’s
unnecessary to take the whole device in for repair,
as it’s usually sufficient to replace the defective
part. Always give the model, serial number of
your equipment and in case of malfunctions also
conditions of use, nature of malfunction and any
error code.
When you encounter unusual behavior from
the device, contact your local Tunturi dealer for
service. If you require spare parts, always give the
model, serial number of your equipment and the
spare part number for the part you need. The spare
part list is at the back of this manual. Use only
spare parts mentioned in the spare part list.
TECHNICAL SPECIFICATIONS
Length ....................................................154 cm
Width ......................................................64 cm
Height ....................................................153 cm
Weight ......................................................58 kg
The C20 meets the requirements of the EU’s
EMC Directives on electromagnetic compatibility
(89/336/EEC). This product therefore carries the
CE label.
The C20 meets EN precision and safety standards
(EN-957).
Due to our continuous policy of product
development, Tunturi reserves the right to change
specifications without notice.
NOTE! The instructions must be followed
carefully in the assembly, use and maintenance
of your equipment. The warranty does not
cover damage due to negligence of the assembly,
adjustment and maintenance instructions described
herein. Changes or modifications not expressly
approved by Tunturi Oy Ltd will void the user’s
authority to operate the equipment!
We wish you many enjoyable trainings!