Filter
Top Products
32
o 4-bolt clamp handlebar clamp to provide a very secure bar fitment.
o Boxer Bar ends
o Handlebar Grips – Hi grip rubber compound.
o Non-corrosive hardware fitted throughout mechanism to prevent corrosion.
Performance
o True Cycle Geometry provided by the unique trapezoidal movement about a
virtual cycling pivot point.
o Optimum low impact total body workout for the most efficient combined cross
training to be found on an indoor cycle.
o Adjustable Hydraulic X-Bars™ Damper resistance to enhance various levels of
upper body exercise.
o X-Bars™ ‘Return to Zero’ system providing up to 170lb (780N) pulling force in
the mechanism to centralise the bars for regular spinning.
o Boxer Bar Ends which provide alternative upper body muscle group workouts
and also provide a wrist rest for added rider comfort.
o High inertia drive system comprised of the 40lb (18.2kg) flywheel and direct
drive gearing to simulate closely the feel of road riding. The sidewall resistance
surface of the flywheel is machined to a perfectly even finish. Each wheel is
finely balanced through a carefully programmed drilling operation to remove
small quantities of distributed weight. The flywheel assembly is completed by
fitting a high quality bearing.
o The transmission system is built to pro road bike standards. TH Power Pro 9900st
Bottom Bracket with ISIS spline drive, hollow, chrome molly steel spindle and
sealed cartridge bearings. Standard 68mm bottom bracket width, 110 mm spindle
length. The ISIS spline crank arm mounting system is superior to square tapered
spindles because it is stronger, less likely to squeak or come lose and makes crank
arm removal and installation faster and easier.
o 3” x 1” (75mm x 25mm) felt pads to provide smooth pedal action and evenly
distributed resistance.
o KMC S10 Stainless Steel chain (½ x 1/8” – 116 links) for low maintenance.
o Shimano SF-MX30 ½ x1/8, 16T freewheel and 52 tooth steel chain ring for
added life.
o VP D68 aluminium alloy two sided pedals with chrome molly axles allowing a
choice of SPD clip-less or half-toe clip.
Adjustability
o Fully indexed Grip-Shift™ providing a very efficient and easy to control
adjustment to the flywheel resistance system for lower body elements.
o Fully adjustable X-Bars™ Damper Resistance System for upper body elements.
o A five-way, fully adjustable Rider Compartment accommodates users of nearly
any size. Easily accessible and large one-hand quick release levers to make most
the quick and easy adjustments.
o A self-aligning handlebar stem adjusts vertically up to 5” (130mm) with laser
etched reference numbers on the handlebar stem aid when resetting your position.
o Quick release Saddle Reach adjustment up to 3.5” (90mm) via an extremely rigid
extruded aluminium track and guide. Laser etched reference numbers on the
sliding saddle base help you set your favorite position.
o Quick release Saddle Height adjustment laser etched “Indexed” seat positioning.
An extra long, self-aligning seat post adjusts 15.75” (400 mm) to accommodate