Filter
Top Products
11
MAINTENANCE INSTRUCTIONS
Helpful Hints
The safety level given by the design of X-Bike™ Indoor Performance Bike can only be
maintained when the equipment is regularly examined for damage and wear. Inoperable
components should be replaced or the equipment should be put out of use until it is repaired.
Read all maintenance instructions before beginning work.
All references to the right or left side and to the front or back are made as if you were sitting on
the exercise bike ready for use. For example, the chain guard is on the right side of the bike and
the flywheel is on the front.
For identification purposes, the serial number of the X-Bike™ Indoor Cycle is located on the
front support Leg and the serial number for the X-Bars™ System is located internally on the
main base plate, which can be accessed by removing the bottom cover.
Front of Bike Frame
Serial Number
Tool List
The following tools will be needed to carry out service and maintenance:
• Spanners including 10mm, 13mm, 15mm (Pedal Spanner) and 17mm
• Metric Hex Keys (long) set including 2.5, 3, 4, 5, 6, and 8mm.
• Genuine X-Bike BB Lock Ring removal tool.
• Phillips screwdriver
• Bicycle crank arm puller
• Bottom Bearing Cup tool
• Shimano® compatible bottom bracket tool and 1/2 “ driver
• Trixter Spring Fitting tool