Filter
Top Products
27
620-7992 Rev 001
S
ETTING
U
P
Y
OUR
P
ERSONAL
V
IEWING
S
CREEN
(PAL)
Basic Operations
Turning On / Off the Power
Selecting the Input Signal Source
Turning On
Press the button on the control module, the unit will be turned on and you will be ready to use its features.
Turning Off
With the power on, press the button on the control module to turn off the unit.
Note:
•
When selecting AV mode, the button can not work. If you want to turn off the unit, please select DTV/
ATV mode first.
Press the ‘7’, ‘8’, and ‘9’ buttons simultaneously to toggle between input sources. Options include:
•
ATV - Watch analog TV.
•
DTV - Watch digital TV.
•
iPod - Listen to your iPod or watch a movie or other video from your iPod on the PVS screen.
•
USB - Listen to music from your USB device.
Notes:
•
In DTV / ATV mode, when there is no signal input for 30 seconds, the unit will turn off the back light auto-
matically. Once you press any button (except button) on the control module or the unit receives a sig-
nal input, the unit will display normally.
•
In AV mode, when there is no signal input for 30 seconds or the unit only plays audio, the unit will turn off
the back light automatically, once the unit receives a signal input or you press CH+ or CH- button on the
control module, the unit will display normally.
•
When there is no operation within 15 seconds, the on-screen menu will disappear from the screen automatically.
Channel Selection
You can use the following ways to change channels:
•
Press CH+ or CH- to go to the next or previous channel. The skipped channels can't be selected.
•
Press the number buttons ( 0 - 9) to directly select any channel you want then press OK.
•
To go to the previous channel viewed, press the button.
Note:
•
TV is capable of receiving both radio and TV broadcasts. And for TV reception, your new unit is capable
of receiving both traditional analog channels and digital channels.
•
By using 0 – 9 number buttons, you can not select analog channels in DTV mode, or digital channels in
ATV mode.
•
If you input one digit or two-digit channel number, you can press OK to go directly to the channel without waiting.