Filter
Top Products
9
620-7921 Rev A
Step 13.
Assemble the front and back display parts to-
gether by sliding the bottom of the front display
under the 2 tabs at the base first, then pressing
front display against the back cover.
Caution: Be careful not to pinch any wires.
Step 14.
Using provided Phillips head screw driver, se-
cure the front display to the back with (8) M4 x
0.7 x 19mm long Phillips head screws.
Step 15.
Locate left side upper body arm, move to left
side of the Total Body Trainer. Attach the left
upper body arm to the left hub, align the pin to
the unthreaded hole.
Step 16.
Install the left arm and secure with (5) 1/4-20 x
1/2 socket head screws. Tighten the screws to
240 in-lbs (27 N-m) of torque with the 3/16” hex
key. Repeat for the opposite side.
1
2