Filter
Top Products
7
620-7921 Rev A
Step 5.
Using provided screwdriver, remove the M4 x
0.7 screws that hold the display assembly to-
gether, then separate the back of the display
from the front.
Note: Retain the screws for later use.
Step 6.
Slide the back of the display with the mounting
bracket onto the upper neck of the Total Body
Trainer.
Caution: Be careful not to pinch any cables between
the two sections of the assembled neck
Step 7.
Line up the four holes of the mounting bracket
with holes of the neck, then insert four 6mm x
50mm socket head cap screws.
Step 8.
Using provided 5mm hex key, tighten down the
screws to 240 in-lbs (27 N-m).