Filter
Top Products
42
620-7921 Rev A
Step 17.
Install the iPod® cable into the iPod® cradle on
the front side of the display console by removing
the plug from the cradle then inserting the cable
through opening. Make sure cable is aligned
properly with the display plastics. Press firmly to
insure the cable is seated into the cradel.
Step 19.
Now install the new head phone jack mount.
Use the screw saved from the earlier step to
secure the mount to the display.
Step 20.
Identify the cables coming out of the new center
console:
1. Center console keypad ribbon cable.
2. Center console power cable.
3. Center console ground cable.
4. Seven-pin interface cable.
1
2
3
4
Step 18.
Tie the iPod® cable to the plastic using the 3.5”
tie wrap.