Filter
Top Products
16
620-7921 Rev A
Step 20.
Using a Phillips head screw driver, secure the
front display to the back with (8) M4 x 0.7 x
19mm long Phillips head screws.
Step 19.
Assemble the front and back display parts to-
gether by sliding the bottom of the front display
under the 2 tabs at the base first, then pressing
front display against the back cover.
Caution: Be careful not to pinch any wires.
1
2
Step 17.
Plug in the Heart rate ground cable into the
quick disconnect tab on the display mount.
Step 18.
Plug in the ground cable coming from upper left
side of the display mounting bracket into the
quick disconnect tab on the embedded display
assembly.