Filter
Top Products
26
620-7921 Rev A
Step 30.
Plug back the Heart rate ground cable into the
quick disconnect tab on the display mount.
Step 31.
Plug the center console ground cable into the
quick disconnect tab on the display mount.
Step 32.
Assemble the front and back display parts to-
gether by sliding the bottom of the front display
under the 2 tabs at the base first, then pressing
front display against the back cover.
Caution: Be careful not to pinch any wires.
Step 29.
Next, plug-in the heart rate cable from the neck
into the heart rate board connector on the dis-
play.
1
2