Filter
Top Products
34
620-7921 Rev A
Step 23.
Take the front display plastics with the new cen-
ter console to the base unit. Hold the front dis-
play plastics at the top with one hand while con-
necting the cables/harnesses with the other.
Step 24.
Identify the four cables coming out of the neck
and mounting bracket:
1. Heart rate cable.
2. Main I/O cable.
3. Coax cable.
4. DC power cable.
Note: The coax and DC power cables are part of
the PVS and embedded kits and should be tucked
down the neck for possible future use.
1
2
3
4
Step 21.
Install the CSAFE power connector on the new
bottom plastic cover.
Step 22.
Install the new bottom plastic cover onto display,
use the screws saved from the earlier step to
secure the display bottom. Tighten the screws
so they are snug, then plug in the CSAFE power
cable to the back of the display.
Note: Take special care to not pinch any of the ca-
bles between the plastics.