Filter
Top Products
15
620-7921 Rev A
Step 15.
Next plug in the coax cable to the coax adapter
on the tuner card of the embedded display as-
sembly.
Step 16.
Now plug in the DC power cable from the base
neck to DC connectors on the embedded dis-
play assembly.
Step 14.
Plug-in the 12-pin main I/O cable from the neck
to the 12 pin connector on the FitCPU board of
the embedded display assembly.
Step 13.
Plug-in the heart rate cable from the neck into
the heart rate board connector on the FitCPU
board of the embedded display assembly.