Star Trac 7600 Home Gym User Manual


 
Service Manual: E-TR and E-TRi
54
Fig 7
Step 1
Start the treadmill and set the speed to 3.0 mph
(5.0 kph). Make sure the running belt tracks to
the center (see Fig 7).
If the running belt shifts or tracks to either side
(left or right), follow the appropriate procedure
below.
If the belt tracks to the LEFT side:
If the belt tracks to the RIGHT side:
Turn the LEFT bolt ¼
turn
clockwise
Turn the RIGHT bolt ¼
turn
counter-clockwise
Turn the LEFT bolt ¼
turn
counter-clockwise
Turn the RIGHT bolt ¼
turn
clockwise
Repeat above steps until the running belt tracks in the center
Note that the above drawings are not to scale and have been exaggerated to better show an offset tracking.
If you have any questions or concerns STOP and contact Star Trac immediately!
800-503-1221 Toll Free
x
714-669-1660 Tel