Filter
Top Products
Service Manual: E-TR and E-TRi
30
ELEVATION ZERO:
Sets the value for 0% (zero percent) for the elevation motor sensor.
ELEVATION MAX:
Sets the value for 15% (maximum incline) for the elevation motor sensor.
LAST DECK:
This parameter is used for models with a waxable
style running belt. If you
have a waxless
style treadmill and REWAX BELT appears on your display,
go to the MODEL parameter and make sure your unit is set for the correct
model.
LAST BELT:
A parameter available for you to enter the mileage (DISTANCE) at which the
running belt was replaced. This aids in your record keeping.
LAST MOTOR:
A parameter available for you to enter the mileage (DISTANCE) at which the
drive motor was replaced. This aids in your record keeping.
CS AUTO STATUS:
An internal calculation setting. Leave at default setting.
MODEL:
Sets the model that the display electronic board will be used on. Note that
some features may not work (fans, scales, entertainment, etc.) if this setting
is incorrect.
HR CALC. TIME:
Sets the amount of time the Heart Rate system will seek to acquire a heart
rate reading before it resets and begins seeking again if not detected.
The following parameters are used to keep track of which programs users are selecting. These
parameters do not affect the functionality of the unit, but can be used to log the types of programs
users prefer to use.
MANUAL
FOREST WALK
TRAIL
ALPINE PASS
RANDOM
5K LOOP
10K LOOP
CUSTOM PALM
DYNAMIC HR
CONSTANT HR
QUICKSTART
FITNESS TEST
FIRE FIGHTER
US ARMY TEST
USMC TEST
USAF TEST
NAVY TEST
Check with a Star Trac sales representative for definitions