Filter
Top Products
Page 16
contact heart rate signals. If you do not see a heart rate on the console, try one
of the following:
• Move closer to the console.
• Tighten the elastic part of the chest belt.
• Adjust the belt higher or lower on your chest.
• Remoisten the electrodes.
• Test your chest strap with a machine that you know is working, or
with a heart rate watch that you know is working.
• If possible, replace or exchange your console with a console
(from the same type of machine) that you know is working and
retest the machine.
• Verify that the console software has been set up properly for
heart rate detection (see pg. 13-14).
Figure 6: Transmitter Belt
Maintaining the Transmitter Belt
Clean the chest belt regularly with mild soap and water, then dry thoroughly -
residual sweat and moisture keep the transmitter active and drain the battery
in the transmitter. Do not use abrasives or chemicals such as steel wool or
alcohol for cleaning, as they can damage the electrodes permanently. You can
order replacement belts from StairMaster, Polar Electro, Inc., or your local
fitness store:
StairMaster 800-331-3578 P/N 64000
Polar Electro, Inc. 800-227-1314
TELEMETRY HEART RATE