Filter
Top Products
6300/6310 Treadmill Electronics Repair Manual – Testing
EMI Filter Test (Continued)
Put the multimeter to the ohm setting. Place probes as shown below.
Test 3. Point A to Point E; Normal reading: No reaction (1 or OL).
Test Figure Test Point Normal Reading Test Item
Fig. 1 A-B 0.4 There should be continuity between A and
B
Fig. 2 C-D 0.4 There should be continuity between C and
D
Fig. 3 A-E 1 or OL (open) There should not be continuity between A
and E; Continuity here indicates a short.
FILTER.02
A
E