Filter
Top Products
6300/6310 Treadmill Electronics Repair Manual – 6300 Introduction
Operating the 6300 Treadmill: Manual Mode
Manual Operation: Manual mode is the default for this product. Manual LED lights up.
Press other keys to directly operate the unit.
Speed: Press Speed <▲> key to increase speed. Speed window shows increasing speed value.
Press Speed <▼> key to decrease speed. Speed window shows decreasing speed value.
Speed measurement units are determined by the IC. Pressing keys will not change MPH to KPH.
Speed range: 0.1 to 12.0 MPH (or 0.2-20.0 KPH, European models).
Incline: Press INCLINE <▲> key to raise incline. Incline window shows increasing incline
values. Incline motor operates up. Press INCLINE <▼> key to lower incline. Incline window shows
decreasing incline values.
Incline range: 0-15%.
Change Key: Press to change mode window settings. One setting shows distance, calories, time,
speed. The other setting shows incline, cal/hr, pace, METs.
6300 INTRO.07