Filter
Top Products
Page 17 of 75
intelligent wireless platform
airClient™ TOTAL 3415 User Guide
Menu Item Menu Sub-items Description
Wireless Statistics
Displays traffic statistics on the
Wireless side
Association Status
Shows the status of the association and
the MAC of the AP associated with.
Shows the Link Status Graph for the
associated link.
DHCP
Allows user to Enable or Disable DHCP
Server
Allows user to Enable/Disable DHCP
Relay (Note: DHCP Relay feature is
only applicable for the 3415-03 model).
DHCP List
Displays the DHCP List; if DHCP
Server is Enabled
IP/Port Forwarding
Allows user to add entries to map Local
Area Network IP Address (or port)
behind the NAT to a global port
accessible through the wireless
interface. User will be able to use this
option only when the unit is configured
in the NAT mode.
Routing Table
Allows the user to view, add and delete
or update static routes.
Allows the user to Enable or Disable
RIP running on the device. RIPv2 is run
by default on the device.
Networking
Bandwidth Control
Allows bandwidth management of the
wireless link
Wireless Settings
Allows the user to set SSID, Enable or
Disable SSID Suppressed, select
Internal or External antenna, configure
Distance, select Data Rate, set
Transmit Power, set Country settings,
Preamble and Slot time
Radio
Security
Security:
Allows user to set the security mode for
the device. User can choose Open
System, Shared, or WPA-PSK.
Open System / Shared Key:
• Allows
Allow user to turn on encryption
using WEP at 64 or 128 bits and
choose between Open Systems and
Shared Key.
• WPA-PSK:
This mode allows user to use WPA
pre-shared key and cipher as TKIP
or AES for client authentication.