Page 14 of 75
intelligent wireless platform
airClient™ TOTAL 3415 User Guide
The descriptions of the fields in the Summary Information page are provided in the table (Table 2-1)
below:
Table 2-1 Description of the field items in the ‘Summary Information’ page
Field Items on Summary Info page Descriptions
LAN IP Mode Set to Static IP by default
System Name This is the user defined name of the unit
IP Address Ethernet IP Address.
LAN Settings
Subnet Mask Ethernet IP subnet Mask
WLAN Type Static IP or Dynamic IP
IP Address Wireless IP address
Network mask Wireless IP Mask
Gateway Address Wireless IP Gateway
DNS Server Primary DNS Server
WLAN
Settings
Secondary DNS Secondary DNS Server
SSID Displays the SSID currently set for the device. This is the
public name of the wireless link
Channel Displays the channel at which the Client is associated
Association Status Displays Associated or Not Associated status
Wireless Mode Wireless operating mode (802.11b / 802.11g)
Security Mode Displays if security is Enabled or Disabled
Authentication Open System / Shared Key / WPA-PSK
Data Rate (Mbps) This indicates the rate at which the radio has been asked
to operate by the user.
Transmit Power This is used to set the output power of the radio.
Preamble The radio preamble is a section of data at the head of a
packet. The preamble contains information that the radio
needs when sending and receiving packets
Wireless
Settings
Slot Time This can be set to Long Short time or Short time
DHCP Server
Settings
DHCP Server Displays if DHCP Server is Enabled or Disabled
Address Pool Allows the Address Pool to be System defined or User
defined
Start Address The Starting address of the DHCP Client IP Address pool
End Address The Ending address of the DHCP Client IP Address pool
Lease Time The maximum time of the DHCP Leases. The maximum
allowable limit is 2880 minutes.
NAT
Virtual Server Displays the no. of entries in the IP/Port Forwarding Table
Routing
Setting
Static Routing Displays the no. of static routes in the Static Routing Table