Filter
Top Products
43
www.seuservice.com
For the purpose of static prevention, special
coating is applied to the CRT face of this
product. To protect the coating, pay
attention to the following points. Damaging
the coating film can cause electric shock to
the customers. For the caution to be heeded
when clearing, refer to the Section of
Periodic inspection Table.
Do not apply or rub with a hard item (a rod
with pointed edge, pen, etc.) to or on
C.R.T. surfaces.
Avoid applying stickers, seals, etc. on the
C.R.T. face.
Do not remove aluminum foils from the
C.R.T. corners. Removing the aluminum
foils can cause static prevention effects to
be lowered.
Monitor adjustments have been made at the time of shipment. Therefore do not make
further adjustment without a justifiable reason. Adjusting the monitor which contains
high tension parts is dangerous work. Also, an erroneous adjustment can cause devi-
ated synchronization and image fault, resulting in malfunctioning.
When making adjustment, utilize a resinous Alignment Rod. Servicing with bare
hands or using conductive tools can cause electric shock.