Filter
Top Products
27
www.seuservice.com
The “COIN ASSIGNMENTS” mode permits you to set the start number of credits, as well as the basic
numbers of coins and credits. This mode expresses “how many coins correspond to how many credits.”
SETTING CHANGE PROCEDURE
Press the SERVICE BUTTON to move the arrow to the desired item.
Choose the desired setting change item by using the TEST BUTTON.
To return to the MENU mode, move the arrow to EXIT and press the TEST BUTTON.
COIN/CREDIT SETTING
Sets the CREDITS increase increment per coin
insertion. There are 27 setings from #1 to #27,
expressed in XX CREDIT as against XX COINS
inserted. (TABLE 7.10a, 7.10b) #27 refers to FREE
PLAY. When the COIN CHUTE TYPE is set to
INDIVIDUAL, there are some setting numbers not
displayed as indicated in TABLE 7.10b.
MANUAL SETTING
This allows credit increase setting as against coin
insertion to be further set in the manner finer than
COIN/CREDIT SETTING (refer to TABLE 7.10c).
COIN ASSIGNMENTS
COIN/CREDIT SETTING #1
CHUTE#1 1 COIN 1 CREDIT
CHUTE#2 1 COIN 1 CREDIT
ADDITIONAL SETTING
MANUAL SETTING
>EXIT
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
Setting changes cannot be stored unless the TEST BUTTON is pressed while the
arrow is on EXIT.
7 - 10 COIN ASSIGNMENTS
7 - 10 COIN ASSIGNMENTS
1
2
3