Filter
Top Products
12
www.seuservice.com
SECURING IN PLACE (ADJUSTER ADJUSTMENT)
Move the machine to the installation
position.
Cause all of the leg levelers to make
contact with the floor. By using a wrench,
make adjustments in the height of the leg
adjusters to ensure that the machine's
position is level.
After making adjustments, fasten the leg
adjuster nut upward and secure the height
of the leg adjuster.
This machine has 4 each of casters and adjusters (shown below). When the installation position is deter-
mined, cause the adjusters to come into contact with the floor directly, make adjustments in a manner so
that the casters will be raised approximately 5mm. from the floor and make sure that the machine position
is level.
Be sure to have all the Adjusters make contact with the surface. Unless the Adjusters
come into contact with the surface, the Cabinet can move of itself, causing an acci-
dent.
3
3
2
1