Filter
Top Products
34
www.seuservice.com
In order to prevent electric shock and short circuit, be sure to turn off the power before
performing work on the interior parts of the product.
Be careful not to damage wiring. Damaged wiring can cause electric shock or short circuit.
Do not touch places other than those specified. Touching places other than those specified can
cause an electric shock or short circuit accident.
If the Shift Lever operation is not satisfactory, remove the Shift Lever in the following procedure and replace
the microswitch.
9 - 1 REMOVING THE SHIFT LEVER
9. SHIFT LEVER
1
2
Turn Power off.
Take out the 4 SPECIAL BOLTS and pull the SHIFT LEVER UNIT upward by paying careful attention so as not
to damage the wiring.
Disconnect the 2 connectors to allow the unit to be removed.
When reinstalling, follow the procedure oppisite as when removing. At this time, ensure that“DOWN” display
appears on the upper part as shown.
3
4