Filter
Top Products
8
2. Attach the Upright (77) to the Base (80) with two
3/8" x 5 1/2" Screws (5), two 3/8" Star Washers
(8), and a 3/8” x 2 3/4” Screw (17) with a 3/8”
Star Washer (8) as shown. Start all three
Screws, and then tighten them. Be careful
not to pinch the Upright Wire (not shown) in
the Upright.
Attach the other Upright (not shown) as de-
scribed above. Note: There is not a wire on the
left side.
2
77
17
80
8
5
8
3
89
37
A
A
3. Set the Console (37) face down on a soft sur-
face to avoid scraching the Console. Remove
and discard the four screws (A) from the
Console Base Back (89). Lift off the Console
Base Back.