Filter
Top Products
12
11. Make sure that all parts are properly tightened before you use the incline trainer. Keep the included hex
keys in a secure place. One of the hex keys is used to adjust the walking belt (see pages 29 and 30). To pro-
tect the floor or carpet from damage, place a mat under the incline trainer.
77
36
1
106
110
10. See page 14 and plug in the power cord. Next,
see page 16 and turn on the power. Then, touch
the Incline button numbered 40 on the console.
The Frame (58) will adjust to an incline of 40
percent. Then, unplug the power cord.
Identify the Left Inside Cover (110) and the Left
Outside Cover (106). Next, hold the Left Inside
Cover against the left Upright (77). Then, hold
the Left Ouside Cover against the Left Inside
Cover.
Attach the Left Outside Cover (106) to the Left
Inside Cover (110) with a #8 x 1 1/4" Screw (36)
and two #8 x 3/4" Screws (1). Start all three
Screws and then tighten them.
Attach the Right Inside Cover and the Right
Outside Cover (not shown) as described
above.
58
10