Sears NTL19010.0 Treadmill User Manual


 
16
HOW TO TURN ON THE POWER
IMPORTANT: If the incline trainer has been ex-
posed to cold temperatures, allow it to warm to
room temperature before you turn on the power. If
you do not do this, you may damage the console
display or other electrical components.
Plug in the power cord (see
page 14). Next, locate the
power switch on the incline
trainer frame near the power
cord. Make sure that the
switch is in the reset position.
IMPORTANT: The console features a display demo
mode, designed to be used if the incline trainer is
displayed in a store. If the demo mode is turned
on, the screen will show a demo presentation after
you plug in the power cord and press the power
switch into the reset position, before you insert
the key. To turn off the demo mode, see step 5 on
page 23.
Next, stand on the
foot rails of the incline
trainer. Locate the clip
attached to the key, and
slide the clip securely
onto the waistband of
your clothes. Then,
insert the key into the
console. Note: It may
take a minute for the
console to be ready for use. IMPORTANT: In an
emergency, the key can be pulled from the con-
sole, causing the walking belt to slow to a stop.
Test the clip by carefully taking a few steps back-
ward; if the key is not pulled from the console, ad-
just the position of the clip.
HOW TO USE THE TOUCH SCREEN
The console features a tablet with a full-color touch
screen. The following information will help you become
familiar with the tablet’s advanced technology:
•Theconsolefunctionssimilarlytoothertablets.
You can slide or flick your finger against the screen
to move certain images on the screen, such as
the displays in a workout (see step 5 on page 18).
However, you cannot zoom in and out by sliding
your fingers on the screen.
•Thescreenisnotpressuresensitive.Youdonot
need to press hard on the screen.
•Totypeinformationintoatextbox,touchthetext
box to view the keyboard. To use numbers or other
characters on the keyboard, touch the ?123 but-
ton. To view more characters, touch the Alt button.
Touch the Alt button again to return to the number
keyboard. To return to the letter keyboard, touch the
ABC button. To use a capital character, touch the
button with an upward-facing arrow. To use multiple
capital characters, touch the arrow button again. To
return to the lowercase keyboard, touch the arrow
button a third time. To clear the last character, touch
the button with a backward-facing arrow and an X.
•Usethebuttonsontheconsoleshownbelowto
navigate the tablet. Press the Back button to return
to the previous screen. Press the Home button to re-
turn to the main menu. Note: The center button does
not function.
Reset
Back Home
ETNT19010
(NTL19010)
Key
Clip