Filter
Top Products
Problem Check Solution
No display/partial display/unit
will not turn on
Electrical (wall) outlet If outlet does not function, use a properly
functioning outlet.
Connection at front of unit Connection should be secure and undamaged.
Replace adapter or connection at unit if damage
appears.
Main console cable integrity Replace cable if wires appear crimped or cut.
Main console cable connections/
orientation
Confirm cable is connected securely at the back
of the console and at the base of the console
mast.
Console display for cracks or other
damage
Replace console if damaged.
Console Display Replace computer if console only has partial
display.
Unit operates but Telemetric
HR not displayed
Chest Strap Make sure strap is directly against skin and
contact area is moist. Strap should be Polar
®
compatible.
Interference Try moving unit away from sources of interference
(TV, Microwave, etc).
Chest Strap Connect strap to a functioning Polar
®
compatible
device to see if it works. If it does not function,
replace strap. If strap works with other devices
but not with the Schwinn
®
460, replace HR
receiver.
No speed/RPM reading Main console cable integrity All wires in cable should be intact. Replace cable
if wires appear crimped or cut.
Main console cable connections/
position
Confirm cable is securely connected and
properly positioned. Small latch on connector
should line up and snap into place.
Magnet position (requires shroud
removal)
Replace flywheel or entire main assembly if you
do not see a magnet.
RPM Sensor (requires shroud
removal)
RPM sensor should be aligned with magnet
and connected to data cable. Re-align sensor
if necessary. Replace if there is any damage to
sensor or connecting wire.
Troubleshooting
Owner’s Manual
26