Schwinn 460 Elliptical Trainer User Manual


 
To avoid electrical shock, disconnect the power supply before doing maintenace or servicing the machine.
.
Helpful Hints
Read all maintenance instructions thoroughly before beginning any repair work. In some cases, an assistant is required to
perform the necessary tasks.
Inspection
Visually inspect the Schwinn
®
460 fitness machine every time you use it for wear, damage, or loose parts. Replace all parts at
the first sign of wear or damage.
The safety of this product can only be maintained when the equipment is regularly examined for damage and wear.
Only Nautilus-authorized personnel should do service or repair to this machine. See the Contacts page at the end of this
manual to contact Nautilus customer service.
If replacement parts are necessary, use only genuine Nautilus replacement parts and hardware. Failure to use
genuine replacement parts can cause a risk to users, keep the machine from operating correctly or void the
warranty.
Maintenance Schedule
Daily: Before each use, inspect for loose, broken, damaged, or worn parts. Do not use the machine if found in this
condition. Contact Nautilus customer service.
Weekly: Check for smooth roller operation. Wipe any dust, dirt, or grime from the cam or roller surfaces.
Monthly: Check all of the bolts and screws. Tighten them if it is necessary.
NOTICE: To avoid damage to the finish on the Schwinn
®
460 fitness machine and console, never use a petroleum based
solvent when you clean. Avoid getting excessive moisture on the console.
Maintenance
Owner’s Manual
24