Filter
Top Products
26
OPERATION
OPERATION
■
Auto Shut-Off (Sleep Mode)
The console will automatically shut off in approximately
two minutes without use or input. There is no on/off switch.
■
Information Mode
The computer enables you to switch between English or
metric units by pressing and holding the UP and DOWN
buttons simultaneously for three seconds. Use the UP or
DOWN button to select ENGLISH or METRIC, and
press ENTER to confi rm. The computer will enter the
Information mode. By following the displayed menu and
prompts in the Information mode, you will be able to:
Select ENGLISH measurement units, which sets the
computer for:
• Miles
• Miles/hour
• Pounds
• Inches
Or select METRIC measurement units, which sets the
computer for:
• Kilometers
• Kilometers/hour
• Kilograms
• Centimeters
Press ENTER, which will display the software version.
Press ENTER again to exit the Information mode, and the
computer will bring you to the “ENTER PROGRAM”
mode.
■
Grip Heart Rate
This Schwinn
®
elliptical trainer is equipped with grip heart
rate sensors located on the handlebars. You must contact
these sensors with both hands so that the computer can
detect your pulse. The computer uses information detected
by the grip heart rate sensors for many of the software
features. Make sure you are griping the pods, and look
for the fl ashing “heart” icon and pulse rate located on the
lower right portion of the LCD display (to the left of the
motion indicator), indicating that a pulse signal is being
received. This is extremely important for the Heart Rate