Filter
Top Products
page 4
COMMERCIAL PRODUCTS DIVISION
GROUNDING INSTRUCTIONS
The EFX546 must be grounded. If it should malfunction or break down, ground-
ing provides a path of least resistance for electric current which reduces the risk
of electrical shock. The EFX546 is equipped with a power cord having an equip-
ment-grounding conductor and a grounding plug. The plug must be inserted
into an appropriate outlet that is properly installed and grounded in accordance
with all local codes and ordinances. If you do not follow these
Grounding In-
structions
, you could void the Precor limited warranty.
DANGER
Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician or service person if you are
in doubt as to whether the EFX is properly grounded. Do not modify the plug
provided with the unit—if it doesn’t fit the outlet, get a proper outlet installed by
a qualified technician.
120V Units Designated for U.S. Markets
The EFX546 is for use on a nominal 120-volt circuit. The unit’s grounding plug
looks like the plug illustrated in Diagram A. The power outlet must have the
same configuration as the plug. No adapter should be used with this product.
240V Units Designated for U.S. Markets
The EFX546 is for use on a nominal 240-volt circuit. The unit is factory-equipped
with a specific power supply cord to permit connection to a proper electric circuit.
Make sure that the EFX is connected to an outlet having the same configurations
as the plug. See Diagram A. No adapter should be used with this product. If the
EFX must be reconnected for use on a different type of electrical circuit, the
reconnection must be made by qualified service personnel.
SAFETY APPROVAL
When identified with the ETL-c logo, the EFX has been tested and conforms to
the requirements of CAN/CSA-E-335-1/2-94, Safety of Household and Similar
Electrical Appliances.
Diagram A
Correct power
outlet for U.S.
Markets: 20 amp
120-volt and
240-volt plugs.
120-volt grounding plug 240-volt grounding plug