Filter
Top Products
page 29
COMMERCIAL PRODUCTS DIVISION
QUICK STEPS TO WORKING OUT
1
Put on the chest strap.
(Available with the Precor
Heart Rate Option.)
Important: When you begin
moving the foot pedals,
continue to hold onto a
handrail with one hand
while you answer the Setup
prompts with the other.
2
Turn the unit ON.
Hold onto a
handrail while you
step into the foot
pedals and select a
course.
3
1. For your Heart Rate to appear on the display, you need
to wear a POLAR
®
chest strap or hold onto the touch-
sensitive electrode strips on the handrail.
2. The I/O switch is located at the rear of the EFX.
CAUTION: Hold onto the handrails while you step
into the foot pedals.
3. Move the foot pedals and follow the display prompts. You
are prompted to make a COURSE selection and enter
your workout TIME, WEIGHT, and AGE.
Note: To answer the Setup prompts, use the numeric or
▼▲ keys. Press Enter to select the information being
displayed. The 8 available courses appear on the label at-
tached to the display console. Brief course descriptions are
provided beginning on page 32.
Important: Any time during the Setup prompts, you can
press the Quick Start key. Refer to QUICK START on
page 26.
To pause during your workout session before finishing
the selected course, stop pedaling. See
Pause, Cool
Down and Exit Features
for more information.
4. When you have completed a course that has a limited du-
ration, a 5-minute cool down period automatically begins.
Hold onto the handrail while the EFX reduces the resis-
tance by 20%. Note that you can always exit a course pre-
maturely using the Reset key. Refer to
Pause, Cool Down
and Exit Features
on page 30.
Note: Not all courses supply the cool-down period. See
Cooling Down After Your Workout
.
5. After you complete the 5-minute cool-down period (or exit
a course prematurely using the Reset key), the Workout
Summary banner appears. Workout statistics except TIME,
STRIDES and CALORIES reset to zero. (Note that the TIME
display shows the accumulated workout time including
warm-up and cool-down periods.) You are given 2 minutes
to review your workout statistics before the display auto-
matically resets to the Precor banner. You can also press
Reset, to return to the Precor banner.
6. Hold on to the stationary handrails while you carefully
step down from the EFX.
If your club does not have the CSAFE option and you wish to
monitor your progress toward your fitness goals, a form for re-
cording workout statistics is provided on page 37.
5
End your workout and
review your workout
statistics.
4
Continue your
workout until course
completion.
6
Hold on to a
stationary handrail
while you step off
the EFX.