Filter
Top Products
page 37
COMMERCIAL PRODUCTS DIVISION
REMOVING THE LOCKING PIN
The locking pin secures the roller arm and keeps it from traveling up or down the
ramp. Pull firmly on the pin to slide it out of the ramp. A lanyard is attached to the
locking pin and ramp.
Store the locking pin underneath the ramp once it is removed from the roller arm.
See inset in Diagram 25.
Note: The following text is written in second person so that you, as owner or
manager, can copy the sections (excluding
Maintenance
) for your customers.
WORKOUT TIPS
The steps to working out on the EFX are listed on the next page. A short description
appears in the left margin with the more thorough explanation following on the right.
Tips to consider during your workout are shown below:
• If the optional power adapter is not connected, you need to maintain a stride
rate above 40 strides per minute before keypad entries can occur. If you have
questions, talk to the manager.
• Remove the locking pin. Refer to
Removing the Locking Pin
.
• Answer the Setup prompts by pressing the ▼ or ▲ keys.
• Press Enter to select the information being displayed.
• The workout time prompt lets you choose between and 1 to 240 minutes. If
the custom settings allow it, you can also select an indefinite workout time by
pressing the ▲ key, until the word INFINITE appears on the display.
• During a workout, the Select keys determine which workout statistics appear
on the display.
Diagram 25
EFX Locking pin.
Insert the locking
pin when you are
finished working
out or when you
leave the EFX
for
an extended
length of time.
Storage location