Filter
Top Products
page 34
COMMERCIAL PRODUCTS DIVISION
KEYS ON THE DISPLAY CONSOLE
The Precor products have an easy-to-use keypad that is activated by the slightest touch.
Remind users that they only need to lightly tap the keys.
Each key on the display console’s keypad provides specific functions. The ▼▲
keys let the user enter data in answer to the display prompts and change the
resistance during a workout.
The following information explains the different uses of the keys from left to right.
To locate each key, look at the display console or refer to Diagram 24.
RESISTANCE
▼▲▼▲
▼▲▼▲
▼▲: During a workout, the Resistance ▼▲ keys let the user de-
crease or increase the force applied against his or her stride. The display can
show a range from 1 to 20. Setting #1 provides the least resistance. A user can
review the EFX’s resistance any time during a workout, by lightly touching either
Resistance ▼ or ▲
key. He or she can opt to change the resistance, by holding
the key down for more than two seconds.
Note: The RESISTANCE
▼▲▼▲
▼▲▼▲
▼▲ keys appears on both ends of the display label for
the user’s convenience.
When a user changes the resistance by pressing the Resistance ▼ or ▲ key, the
number that appears on the display shows the
target
resistance (not necessarily,
the present resistance being applied) because the display can change much faster.
The height of the program profile reflects the resistance levels. Each row that is lit
represents three levels of resistance. When the first row is lit, the resistance is
set between 1 and 3. If the first two rows are lit, the selected resistance level
is between 4 and 6, and so on.
Diagram 24
Display console keypad.
Gently, press
and hold the
▼
or ▲
keys to
change the
resistance level.
QuickStart: Bypasses the
remaining Setup prompts and
enters the Manual program.
Exit and return
to banner.
During the Setup
prompts, accepts
displayed data and
moves to next
prompt.
During a workout, the SELECT
keys highlight which workout
statistics appear on the display.