Filter
Top Products
page 23
COMMERCIAL PRODUCTS DIVISION
6
7
8
9
0
QUICK START
1
2
3
4
5
R
E
S
I
S
T
A
N
C
E
E
N
T
E
R
R
E
S
E
T
KEYS ON THE DISPLAY CONSOLE
The Precor products have an easy-to-use keypad that is activated by the
slightest touch. Remind users that they only need to “lightly touch” these ultra-
sensitive keys.
Each key on the display console’s keypad provides specific functions. Nu-
meric keys (numbered 1 - 0) let you enter data in answer to the display prompts
and change the resistance during a workout. The standard keys, Change,
Reset, Quick Start
TM
, Resistance ▼▲, and Enter, let you enter data as well
as control your workout.
The following information explains the different uses of the keys from left to
right. To locate each key, look at the display console or refer to Diagram 10.
Diagram 10
Display console keypad.
Numeric keys: Indicates the
course #, time limit, weight, or age.
During a workout, use these keys
to select a target resistance.
Note: The CHANGE keys are not shown in this diagram.
Refer to Diagram 9 for its location.
Gently, press and hold the
▼ or ▲
key to change the
resistance.
During the Setup
prompts, accepts
displayed data and
moves to next
prompt.
Exits and
returns to
banner.
Quick Start
TM
: Bypasses the
remaining Setup prompts and
enters the Manual course.
KEYPAD TIPS
• Accurate entries are required or features such as Smart Rate
®
will not
work properly.
• Answer the Setup prompts using the numeric keys or by pressing the ▼ or
▲ keys.
• Press Enter to select the information being displayed.
• Pressing Quick Start bypasses further selections and prompts you to
workout in Manual mode. Default values apply (see QUICK START
TM
on
page 25). The Smart Rate
®
display does not appear.
• A time-out occurs during the Setup prompts if the EFX detects no key
presses for 2 minutes. The display returns to the Precor banner.
• Press Reset to return to the Precor banner.