Filter
Top Products
page 10
COMMERCIAL PRODUCTS DIVISION
HARDWARE KIT
Carefully unpack the parts from the shipping container. Open the Hardware kit
and make sure that you have the following items as shown in Diagram 1:
(A) four socket hex screws—upper column assembly
(B) four washers—upper column assembly
(C) four buttonhead hex screws—covers for upright assembly
(D) eight buttonhead hex screws—handlebars
(E) 5/32" hex key—screws on bracket covers
(F) 7/32" hex key—screws on the handlebars (Note: A hex torque wrench
is also required, although it isn’t supplied.)
(G) 1/4” hex key— upper column assembly (Note: A hex torque wrench is
also required, although it isn’t supplied.)
Rubber grommet, upper and lower bracket covers (not shown in Diagram 1)
Diagram 1
EFX556
Hardware kit
C
E
If any items are missing, contact your dealer. For the Precor authorized dealer
or servicer nearest you, call 1-888-665-4404.
Note: After assembling the EFX, be sure to store the hex keys in a secure place.
The tools are used for maintenance procedures that are described in this manual.
ACQUIRE THE APPROPRIATE TOOLS
Obtain the following tools
before
assembling the EFX.
Wire cutter
SAE Standard socket set with a ratchet or 8” crescent wrench
Hex torque wrench
F
A
B
G
D